1 / 5
Scale Prop Spinners for the Lanyu Do-335 which is about 1/14.68 scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
These are made for 3 bladed props - won't work with two blades. I used an FSK 9x7 turning normally in the back, and a GWS 3-bladed reverse prop at the front. They weigh around 7g (latest revisions are 4g) and I just superglue them right to the prop - fast and easy, and not had a problem with that method.
Print instructions
Category: R/C Vehicles Instructions
I printed at 50mm/s sec, eBay PLA on a Printrbot simple metal. To post process it, I sanded with 80 then 180, then rubbed just a bit of oil in the surface to get a nice consistent matt finish.