e-Ink display / thermometer outdoor logger housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller Front part with rain…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller
Front part with rain protection for display (big roof over display)
Back part has a upper compartment for the controller with cables connected directly to the pin header
Lower part with a lot of ventilation openings for a DHT11 / DHT22 or any other weather sensor
Both parts can be closed with the same back plate for weather proofing
I added a shrink tube over the cables from display to controller and some hot glue in the cable hole.
You can mount both parts together using (stainless) M4-bolts, or mount the display part alone e.g. to a woode surface.
I finished it with some gray paint to match the e-ink background
I included also the step files, if you want to change / remix it.
Have fun!
Sebastian
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
25
Filament:
anything PLA or anything
Notes:
I printed the display part with the front face downwards and the back part with the back face downwards -> no supports needed except in the screw / nut recesses.
Category: Outdoor & Garden