1 / 3
Side ways mount for "3DR - RepRapDiscount Full Graphic Smart Controller case"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to mount the case side ways, so I made my own mount. Drill bit needed!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to mount the case side ways, so I made my own mount.
BOM:
- 1x M5 threaded insert
- 2x M3 threaded inserts
- 2x M3x10 screws
- 2x M3 washers
- 4mm drill bit
- drill
Instructions:
- You need to drill the holes with a drill bit. Just hold on the pole and mark the holes through the M3 threaded insert holes.
If I receive the STEP files of the case I will post a full remix.
Update: I added a flat mount version if you don't have the inserts.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.