1 / 3
Side ways mount for "3DR - RepRapDiscount Full Graphic Smart Controller case"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to mount the case side ways, so I made my own mount. Drill bit needed!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted to mount the case side ways, so I made my own mount.
BOM:
- 1x M5 threaded insert
- 2x M3 threaded inserts
- 2x M3x10 screws
- 2x M3 washers
- 4mm drill bit
- drill
Instructions:
- You need to drill the holes with a drill bit. Just hold on the pole and mark the holes through the M3 threaded insert holes.
If I receive the STEP files of the case I will post a full remix.
Update: I added a flat mount version if you don't have the inserts.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.