Print-In-Place Clamshell Container - Single and Multi-Material
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,43 € – 4,20 € netto (bez VAT)
Dla pliku: Clamshell Container - Single - gcode_0.2mm_PLA_MK3SMMU2S_4h8m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,82 € netto (środek widełek).
- Masa podana przez autora
- 41 g
- Czas druku podany przez autora
- 4,14 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Print-In-Place Clamshell Container for Single and Multi-Material Prints - Choose from 3 Models - No Supports
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print-In-Place Clamshell Container for Multi-Material or Single Color Prints
Please click the “Like” button above if you like this model, and if you print it please share a make/comment - I love seeing them and it keeps me motivated to continue making these in my spare time.
If you think of any fun/useful generic icons that might work well on here, let me know in the comments and I will see if I can add them, or remix your own, they need to fit into a 10mm circle.
Clip Model
Nothing extra required.
Magnet Models
Magnet model requires 3mmx2mm magnets. I used these.
Please make sure the polarity of the top magnet is pointing the correct direction before inserting.
Magnets With Covers
Instructions
Print at 0.2mm
You will need to add pauses at the following heights to add the magnets:
- 10.6mm (layer 53 @ 0.2mm)
- 85.2mm (layer 426 @ 0.2mm)
Tolerances are tight, please insert carefully as to not dislodge the print from the bed.
Pausing
In PrusaSlicer, slice and slide the slider down to the layer. Right click on the + and Add pause print.
Please note if you are using Octoprint and a Prusa printer, there is an issue with pausing on the current firmware, see here. You will need to add custom gcode to your octoprint scripts to fix this and only resume prints from Octoprint, not the printer LCD.
Magnets No Covers
There is tolerance to add a dab of glue in the hole.
Multi-Material Models
Please note that the order of the STLs matters! The icons MUST BE LAST in the STL list for them to print properly. I have numbered the STLs for convenience. You should only have 1 number each for each model.
If you want to save a lot of print time, make the top accent color the same as the container.
Printing Instructions
- PrusaSlicer
- Layers and Perimeters → Quality (slower slicing) → Extra perimeters if needed: ✓
- This helps with quality of the icon on the vertical surface
- Infill → Advanced → Fill angle: 35°
- This helps with the quality of the infill on the bottom inside emboss
- DO NOT wipe into the objects infill - this will cause color bleeding
- I personally turn skirt and brim loops to 0 for MM prints, but not required
- Layers and Perimeters → Quality (slower slicing) → Extra perimeters if needed: ✓