1 / 6
Extension arm for Kalkgrund toilet roll holder — zdjęcie 1
1 / 6

Extension arm for Kalkgrund toilet roll holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arm for offsetting the IKEA Kalkgrund toilet roll holder off the wall by 17 cm

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

Arm for offsetting the IKEA Kalkgrund toilet roll holder off the wall. It will offset the holder by 17 cm off the wall and makes the roll easily reachable without the need to turn and reach for the paper hanging on the wall.

It is deisgned to exactly fit to IKEA Kalkgrund Toilet Roll Holder. The holes for the console are designed for 3,5mm wood screws (e.g. 3,5 x 45) with maximum length of 60mm. 

The arm attaches to the wall through two slots, which are designed for 5mm wood screws (e.g. 5x50) with standard 10mm heads. The distance between the screws must be 100mm.

 

It was printed in white PLA using Prusa Mini with 0,8 mm nozzle and 0,40mm layer height, rear side on the plate and no supports. 3 perimeters for extra strength and 15% infill. Feels pretty solid and does not flex. 0,8mm nozzle leaves visible lines which are actually looking pretty nice.

Tagi