1 / 6
Extension arm for Kalkgrund toilet roll holder — image 1
1 / 6

Extension arm for Kalkgrund toilet roll holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Arm for offsetting the IKEA Kalkgrund toilet roll holder off the wall by 17 cm

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
290
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

Arm for offsetting the IKEA Kalkgrund toilet roll holder off the wall. It will offset the holder by 17 cm off the wall and makes the roll easily reachable without the need to turn and reach for the paper hanging on the wall.

It is deisgned to exactly fit to IKEA Kalkgrund Toilet Roll Holder. The holes for the console are designed for 3,5mm wood screws (e.g. 3,5 x 45) with maximum length of 60mm. 

The arm attaches to the wall through two slots, which are designed for 5mm wood screws (e.g. 5x50) with standard 10mm heads. The distance between the screws must be 100mm.

 

It was printed in white PLA using Prusa Mini with 0,8 mm nozzle and 0,40mm layer height, rear side on the plate and no supports. 3 perimeters for extra strength and 15% infill. Feels pretty solid and does not flex. 0,8mm nozzle leaves visible lines which are actually looking pretty nice.

Tags