1 / 1
Rx7 FB and other Mazda turn signal canceler bridge — zdjęcie 1

Rx7 FB and other Mazda turn signal canceler bridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The bridge that holds the spring for the turn signal and that activates the turn signal cancel as shown in the picture.

Ocena
0 / 5
Polubienia
10
Pobrania
99
Wydruki
0
Wyświetlenia
608
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

I had this bridge break on me twice using original 1980-1985 combination switch parts. I decided to make a model to fix them. 

I have yet to see how it will handle in the heat (im using pla might have to anneal it) and the wear, but it works so far. 

I would give it 3-4 walls and 100%infill its super fast to print so might as well.

 

Also if you were interested i did find whole combination switch assemblies with the turn and wiper stalks from aliexpress for 30 usd (vs. 200 dollars in the US) and it looks really good quality. Just search b2000 mazda turn signal and it should work for b2000, 626, miatas, rx7 

Tagi