Eight screw front and rear Panels for Prusa mini/mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of an excellent front panel by nimus, adding additional four screws for extra stiffnes.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After a half year of printing, I noticed my original front and rear panels in mini+ started to crack. I wanted to replace that, and I found an amazing design by nimus. Because I am using Mini Base, which is prone to sagging, I decided to add four more screws to each panel and print everything with 100% infill. Now all my plastic parts in the printer are 3d printed, and overall construction stiffness is higher.
Printing Instruction:
PETG or other strong material
40%+ infill
0.15 or 0.2 layer height
No supports needed