4" Tcp115 T-Line
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small enclosure for the Dayton Audio Tcp115. I sadly don't have software to see how low it will go, but its…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small enclosure for the Dayton Audio Tcp115.
I sadly don't have software to see how low it will go, but its a quarter wave Transmission line box, so it will go low. I needed to print the box in 2 parts since I use the Elegoo Neptune 2 wich is pretty small. You would need some cables and an extra wood panel for atleast one side. I would actually recommend to glue both sides with a thin plywood panel or maybe even metal. It takes like 9days to print and consumes 1,4kg Pla so be prepared. I now have added some bracing part to print extra and put between layers so the walls get a little bit more sturdy. I now have Added m3 screwholes to fasten the side panel.
Print Settings
Printer:
Neptune 2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10%
Filament:
SUNLU PLA
Black
Notes:
I would recommend either printing it with a sturdy infilltype at 5-10% . If you want you can maybe use no infill and fill it with sand /plaster of paris/concrete.
Category: 3D Printing