Liczymy pasujące modele…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
Instructions from creator: 0.3mm layers 3 shells 4 top and bottom solid 40% triangle infill I used 0.2mm layers
I wanted to print this, but didn't have a printer big enough, or a way to cut acrylic. I cut through the internal walls to try to give the glue more to grab. My prints came out pretty rough, did them quick and dirty with a .80 nozzle, and…
Needed an exact model of the speaker for a 3D printed enclosure. Due to the thin .75mm outer lip a precision mounting bracket is required. The speaker comes with a fiber gasket which helps but without a way to precision mount most people…
Intention to print these 4 parts and then use ½inch nominal (0.472 in) plywood for top and bottom. To use threaded rod (¼-20 or similar, those are 6.5mm holes) to clamp shut I'm finding 400-800g per part, so this is a plastic hog… I'm…
Try this as a smoother, less broken-up version: 20 cm x 20 cm Print Bed Version This is a modified version of the subwoofer enclosure, split into smaller parts so it can be printed on 20 cm x 20 cm print beds. I added connectors to make…
This is a small enclosure for the Dayton Audio Tcp115. I sadly don't have software to see how low it will go, but its a quarter wave Transmission line box, so it will go low. I needed to print the box in 2 parts since I use the Elegoo…
This is an archive of a design made when I used to use Tinkercad as my one and only cad program. Furthermore I had no idea how to actualy design speakers when making this speaker. Therefore i would recomend you to flind literaly any other…
Slot Port box for Dayton Audio TCP115-4. Works well. i did gyro infill at 40 percent with 3 wall loops and it is pretty solid for having thinner walls. Feal free to mod if you want. the box should be tuned to about 54hz. I had 1 layer…
