4" Tcp115 T-Line
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small enclosure for the Dayton Audio Tcp115. I sadly don't have software to see how low it will go, but its…
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 217
- Makes
- 0
- Views
- 1,591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a small enclosure for the Dayton Audio Tcp115.
I sadly don't have software to see how low it will go, but its a quarter wave Transmission line box, so it will go low. I needed to print the box in 2 parts since I use the Elegoo Neptune 2 wich is pretty small. You would need some cables and an extra wood panel for atleast one side. I would actually recommend to glue both sides with a thin plywood panel or maybe even metal. It takes like 9days to print and consumes 1,4kg Pla so be prepared. I now have added some bracing part to print extra and put between layers so the walls get a little bit more sturdy. I now have Added m3 screwholes to fasten the side panel.
Print Settings
Printer:
Neptune 2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10%
Filament:
SUNLU PLA
Black
Notes:
I would recommend either printing it with a sturdy infilltype at 5-10% . If you want you can maybe use no infill and fill it with sand /plaster of paris/concrete.
Category: 3D Printing