Outlet Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic outlet cover to hide the wires from my TV.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 2009
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I attempted to run wires through my basement wall I discovered that I had some horizontal studs blocking my ability to run wires vertically inside the wall. So I got some cable organizer channels and designed this simple box in Tinkercad to fit over my 2-gang outlet. It features 4 tabs for adding small command strips so there are no holes in the wall.
Prints without supports if placed with the large flat “front” side of the box on the print bed.
Dimensions:
2-Gang Cover = 153mm x 153mm x 89mm (~6" x 6" x 3.5")
1-Gang Cover = 115mm x 140mm x 89mm (~4.5" x 5.5" x 3.5")
MEGA Cover - 228.6mm x 203.2mm x 89mm (9" x 8" x 3.5") - This model has a hole on top and bottom for routing cables.
Cutout for cable organizer = 30mm x 15mm (~1.2" x .6")
Link to cable concealers used: https://www.amazon.com/gp/product/B01JKO8724/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Link to command strips used: https://www.amazon.com/Command-Picture-Hanging-9-packages-17202ES/dp/B073XS3CHW?th=1
9/3/22 - Added Center and Left Offset openings for cable concealers
9/3/22 - Added 1-Gang models
3/13/26 - Added MEGA BOX model