Extended Z-Drop bracket for a Mercury 1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z-drop brackets that provide an additional 6mm of clearance for the toolhead.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I am using a KlickyNG probe on a Voron Stealthburner on my Mercury 1.1. Based on an Ender 5 pro .
I ran in to an issue integrating this into my machine. First, the stock Klicky probe mount extended too far over the print bed, greatly reducing the print area. After creating a probe bracket that allowed full travel over the bed, I had and issue where the probe mount on the tool head would collide with the z-drop brackets supporting the bed.
So I whipped up a revised bracket with 6mm of additional clearance. This is about the maximum clearance I can add without having to shorten the Z-axis bearing rods.