iPhone 12 Mini with Cover Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple snap to fit iPhone 12 Mini MagSafe Charger Stand to hold it in a protective cover.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 925
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Let's face it: I am clumsy and drop my phone from time to time.
Hence, a good protective cover which also protects the screen was mandatory!
Sadly, all iPhone 12 mini stands had been designed for dimensions without a cover. And the ones holding it by the magnet alone, could hold the weight of iPhone mini with the cover. It always dropped, when it started to vibrate for whatever reason. Really annoying!
The Easy Fix? Let's design an own stand! Here we go.
As far as I can remember, I printed it on a Prusa MK3s in PETG with default settings.
PETG or ASA/ABS is advised, as the snap to fit noses could break in PLA.
This is the second version, as the MagSafe Charger fell out of the first again and again. The diameter cavity for it was shrinked in the second version, but it still sits a bit to loose. I didn't publish it since more than year now, as I wanted to fix this first. As quick fix, a short pice of transparent adhesive tape is enough to fix that problem. Just narrow down the diameter a bit and you will be fine. Finally I came to the conclusion: I will never fix this. Let's publish it. It's good enough to be really helpful.
Pleas take care, the stand consists out of three parts:
- the base
- the backrest
- the backrest backplate
Somehow I lost history in my Fusion360 files and the backrest backplate is missing in my construction. I only had the .STL of it anymore. It's enough to print…