Vibration Dampener - Remix for Kossel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First of all: this is a remix of https://www.thingiverse.com/thing:1319128 and all the credits goes to the original…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
First of all: this is a remix of https://www.thingiverse.com/thing:1319128 and all the credits goes to the original designer.
I used the original feet for almost a year now and they work great. But for an upgrade i needed more room at the under-frame of my Kossel, and the original thing can't go beyond the corner-mounting pieces of the Kossel. This one does because it uses two sides of the aluminum frame instead of three.
It is a tight fit and you need some force, but this remix doesn't fall off when you move your printer.
Happy Dampening :)
Print Settings
Supports:
No
Resolution:
0.2
Filament:
Real/PM PLA
Notes:
Use 5 or 6 perimeters. Of course this model does not use that number of walls, but it gives a strong and solid piece without useless infill.
Category: 3D Printer Parts