1 / 2
26mm pipe's fitting for walls (to be used with cable ties)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed some cheap and easy fitting method for 26mm - Here it is...
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
Needed some cheap and easy fitting method for 26mm - Here it is...
Print it, attach it to the wall with 2 screws, and then tighten your pipe with 2 cable ties.
Job done !
Printed in PLA @ 0.2mm layer height + 20% infill
Printed with the holes for the screws horizontally with no supports.
Works really good (but don't tighten it too much when attaching it to the wall with the screw, otherwise it will break).