1 / 2
26mm pipe's fitting for walls (to be used with cable ties)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed some cheap and easy fitting method for 26mm - Here it is...
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 54
- Makes
- 1
- Views
- 344
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Needed some cheap and easy fitting method for 26mm - Here it is...
Print it, attach it to the wall with 2 screws, and then tighten your pipe with 2 cable ties.
Job done !
Printed in PLA @ 0.2mm layer height + 20% infill
Printed with the holes for the screws horizontally with no supports.
Works really good (but don't tighten it too much when attaching it to the wall with the screw, otherwise it will break).