Counting matching models…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
This is the simplest barbell collar you'll find on the Internet! I hate complex designs so I made my own collars to prevent using supports, custom pins, TPU... Hope you like it!! If so please leave a like You'll need some easy to find…
There are now two options to join the pieces: with glue (choose the files with the word glue ) or interlocking them (choose the files with the word click ). If you need to build a square box, print 8 Corners clamp for cargo straps glue 4…
Parametric woodworking marking-gauge (for 26mm ruler REMIX) need small nail Print Settings Supports: yes is better Resolution: 0.2mm ------ Happy Print to the whole community :)
Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside
Small mitre box with a 1 inch / 26 millimeter channel for 45 and 90 degree cuts.
Custom tire for lego wheel disk. Size of disk is 43x26mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 layer height, 0.8mm nozzle Infill: 0% Filament: PM TPE Black Notes: Printed with 0%…
Tablettenbox für die ganze Woche mit jeweils einem Fach pro Tag, die Box hat einen Durchmesser von 90mm und ist 26mm hoch. Die Box ist mit Magneten 3x2mm versehen https://www.amazon.de/dp/B00TACKU0O Die Box ist komplett mit Magneten…
Das gezeigte Modell im Bild ist mit einer 200mm breiten HPI-Karosserie und mit Offset -3 bestückt. The model shown in the picture is equipped with a 200mm wide HPI body and offset -3. Die Felgen sind in "meinem" Standard-Offset…
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realised that I could not fit my desired 26mm (1") Scotch tape roll on the original roller. This new wheel and psuedo-bearing replace the original wheel, and can…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
A 6 bottle paint holder, designed to work with the Multiboard mounting system . 2025-01-12 - See update below for info about HSW mounting! Inspired by ronald.marvin's take on a 26mm paint rack . The space I had for mounting my paints on…
This protective handle is an ideal protection when you go shopping. Thanks to the practical ring on the protective handle, you do not have to touch the shopping cart anymore. It is super easy to attach, just by easily pressing/attaching…
Remix of @JohnMartin headphone hanger modified for desks with less thick table tops.
This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻ ⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce. 🔧 Perfect…
A little bigger than 26mm because I had tolerance problems, exact size in the pictures. Hope you find this helpful and save about 30€.
I wanted to make camping lights using an off the shelf low cost plastic bulkhead like Eurolux B174 (https://www.eurolux.co.za/products/B174) but I needed a way to attach it securely in any direction to a pole of Gazebo or tent. So I…
A fader bridge for joining 2 neighboring channels for stereo signals, or other grouping applications. Designed for my Allen & Heath mixer, but should work on other brand mixers with 26mm length fader caps. (Mine has 14mm in-between…
Dieser Anschlag ist für Metalllineale mit den Maßen 26mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
A 3x3 base to keep your Vallejo (and Army Painter) bottles organized. Oooh, look, they stack too!
Tiles for Terraforming Mars - The Dice Game The tiles have been resized to fit the 26mm hexagonal fields of the dice game. Also changed the height a little bit so that tiles have same base height. Looks awesome! Have fun! Material: PLA…
A clip to connect your snorkel to your dive mask with 26, 27 and 28mm inside diameters. Print at 100% infill.
Functional suppressor that reduces noisy shooting noise, for the double eagle M904G that fits inside the handguard. It is compatible with other rifle models with 26mm thread.
I have standardized my spool holder accessories and bearings on a 26mm diameter shaft. Those bearings and other spool holders are collected here: https://www.printables.com/model/128653-spool-reel-holder-system-with-adaptors-bearings-fo…
my own creation for hex wall organiser that can be used for holding a blade fuse box or something else
Drillingtemplate for Hettich 26mm concealed hinge --- Bohrschablone für Hettich 26mm Topfscharnier --- Ref. 9261839
If you're a fan of IKEA furniture, you may have encountered a situation where you have an old and a new version of the same product, and they don't quite match up. This was the case for me when I had both an old and a new IKEA KALLAX 2x2,…
The panels around my cubicle are narrower than the original design & have padding on each side, so I added "spikes" that slip behind the padding & hold the bat upright. Here's the pumpkin that goes with it . Use a brim if you have…
Hi, I needed a 26mm tube straightener but really didn't want to spend hundreds of $ in this as I only needed to straight a really small quantity of tubes. I then decided to design something really close to what is available on the market.…
Cast your own tires using this 3D printed mold. The tires created by this mold are designed to fit a 26mm wide 1/10 touring car wheel. Resin Casting Tutorial Playlist…
https://youtu.be/W9a8fvBpOwc if you like it, please consider to subscribe my youtube channel List of material: 3D printed parts 1X M2 x 12mm 13X M2 x 8mm 1X M2 Nut 4X micro servos (SG90 or MG90D or MG90S) Plastic Eye 26mm 1 ~ 1.5mm metal…
Глубиномер (ограничитель) для линейки 26мм (0.5мм) с прижимом/фиксатором. Для изготовления необходим гвоздь 24х1.5 мм. Depth gauge (limiter) for a 26mm (0.5mm) ruler with a clamp/lock. A 24x1.5mm nail is required for production.
Protect yourself with a smooth looking corner guard for your (office) table or desk. There is a manly size for 30mm thick desks, as well as slimmer 26mm thick desks. Feel free to resize in slicer to suit your need. Three styles, full…
Hi, I designed these wheels so that my LC Racing is 195mm wide. wheel has very small offset widht 26mm diameter 52mm hex 12mm
The panels around my cubicle are narrower than the original design & have padding on each side, so I added "spikes" that slip behind the padding & hold the pumpkin upright. Here's the bat that goes with it . Use a brim if you have…
This protective handle is an ideal protection when you go shopping. Thanks to the practical ring on the protective handle, you do not have to touch the shopping cart anymore. It is super easy to attach, just by easily pressing/attaching…
Killflash that fits scopes with 26mm ID. Can be scaled to fit other sizes. Use 10-15% octagonal infill and set top/bottom layers to 0.
This rack system is specifically designed for airbrush artists using bottles that are slightly larger than standard Vallejo sizes. It is a perfect fit for 20ml Homy Arty bottles or any bottle with a 26mm outer diameter . The system…
100 % infill PLA @0.15
Place on build plate with the largest part of the taper facing down. Supports required for locking features. print two per pole, 8 needed per wire rack shelf.
FPV camera adapter 19mm to 26mm. Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design but included as an STL), the original can be found here -…
Medical tape dispenser M3 26mm inner diameter 26mm wide print flat, foldable
Print in TPE/TPU. 2 perimeters, 20% infill.
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp Filaments recommended: Nylon PA12 ASA PPS-CF PPA-CF PA6-CF PAHT-CF PA6-GF or filaments with a excellent…
This bracket installs to the Skadis to fit a rod 1" or 26mm in diameter snuggly to filament can be rested atop. I used a dowel just like this https://a.co/d/6E9qGLj and was able to fit around 16 1kg spools along a 48" dowel with one…
These are clips to attach things / projects to flat webbing. One side is closable allowing easy attachment and detachment from webbing on packs, clothing, etc., and it closes securely and won't slip open under reasonable load. There are…
I've seen other mounts for the Omega powder coating gun, but they were too small for the Blukar 2000 Lumen rechargeable flashlight , that I use with my setup. The top opening is 26mm, so any other identically sized flashlight would fit. I…
Accurately mark and align drilling positions for concealed cabinet hinges with this practical 26mm drilling template. Designed for cup-style hinges, this jig ensures precise hole placement, making installation faster and more…
This is a tripod mount for the Hadley Telescope Tripod adapter made by Gyoenastaader. I made this to fit my MX1000 tripod, not sure where its from it was my mothers but she isnt using it anymore. I found this prints best upside-down and…
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
I already had a Q2 controller mount on wall with holes spaced 26mm so i just moved lower hole few mm up so it fits
Tube rings for my 76mm Newtonian. Diameter of the tube is about 126mm, so the rings should fit larger tubes also. The dovetail plate can be attached by 1/4" screws. Hole size is sufficient to allow to sink 3/8" to 1/4" metal adapter in…
🌐 Description Classic, minimalist, and extremely sturdy S-hooks, specifically optimized for 3D printing! Perfect for hanging gear, bags, or accessories from rails, pipes, or handlebars. This pack covers all common pipe diameters from 18mm…
Bolt this onto your 1-inch wire rack shelf poles for arm mounting. Use the TPU gaskets from the original model found here: https://www.printables.com/model/1014506-monitor-stand-clamp-for-funkyarts-arm I provided 2 versions, with the…
Weiche Backen für einen Schraubstock. Zwei Neodym Rundmagnete sorgen dafür, dass die Backen sich im Schraubstock halten. Das eingebrachte waagerechte Prisma dient der Aufnahme von runden Bauteilen, damit sich diese bei Belastung nicht…
Adapter I made to connect vacuum to 25-26mm ID ports, commonly found on sanders or smaller tools. Tapered ends for snug universal fits.
This is a 3D printable compact designed to hold a single, standard 26mm round magnetic eyeshadow pan, offering a practical way to store individual shadows for travel or custom organization. The lid and base connect via an integrated…
Inevitably, I lost a few caps for my USB drives, so I created a couple of replacements. I have included two different versions, should you have a standard-length drive or something a little longer (like my Vansuny drive). I've only tried…
I needed a bit taller version than the original. Couldn't quite fit my under bed storage boxes.
For anyone who bought a 26mm condenser capsule for BM800 and doesn't want to modify the standard holder. It is a 3 piece design, so it's not hard to print and should be sturdy enough even without glue. Print instructions: All parts are…
Needed some cheap and easy fitting method for 26mm - Here it is... Print it, attach it to the wall with 2 screws, and then tighten your pipe with 2 cable ties. Job done ! Printed in PLA @ 0.2mm layer height + 20% infill Printed with the…
This highly detailed 3D printable wheel set features authentic Bugatti La Voiture Noire–style rims , specially designed and optimized for 1/10 scale touring cars using a standard 26 mm width and 12 mm hex mount — a perfect fit for the…
I bought cheap tires from Aliexpress but I couldn't find any compatible wheels. Link to 63x26mm tires: https://www.aliexpress.com/item/1005004783223829.html?spm=a2g0o.order_list.order_list_main.50.21ef1802I5UhtY So here they are. The…
Uses two M3 bolts to hold the microphone. Category: Camera
The purpose of this adapter is for use with common sealed barrels/drums. It can be screwed on from the outside by holding the inner piece in place through the hole without the need of creating a larger opening at the top. I'm using it…
This is a model you can use to create mounts for common 45 x 26mm thermometer/hygrometer available on Aliexpress, E-Bay and Amazon
I have been wanting to pare down my travel makeup-kit to the size of a pencil case, but one issue that kept popping up was how to take a few different eyeshadow colors that would be enough for a fairly complete look, but still very…
Mount any 26mm light to MLOK handguards. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print…
This is just a small hook that I created to hang my hats and caps on my coat hanger rack. The hook is for 26mm round hanger poles. I printed it at 100% infill with eSun PETG. I used the stock settings on the Elegoo slicer and added a…
A 1x3 Gridfinity storage block for small bottles, such as scented oils.
Use with M6 threaded rod or alternatively, the 3mm standoffs. Use M4 screw for the pivot
126mm Rear bike frame spacer for protecting frame when shipping For vintage bikes mainly.
Counterweight rod adapter for Skywatcher 18mm counterweight and Skywatcher counterweights with 26mm hole. Category: Hobby
Plunger rods of various lengths to maximize the draw. Plungers are to take OD21mmX2.4mm rings but can do other 2mm thick rings as well. All threads are M12. Plungers can be printed at 0.2 mm but for rods it is better to use 0.1-0.15 mm…
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
This is a clamp to mount devices meant for a regular European bike on a 50mm tube-shaped bike frame. You will need a rubber O-ring with a diameter of about 40-45mm to attach it firmly. I also recommend a few tiny drops of hot glue or a…
With this longboard holder your longboard will never be in your way again. The holder is attached to the wall with standard countersunk screws. Print the holder lying on its side, so the holder has the maximum strength
This compact and efficient propeller mixer is designed for quick and thorough mixing of resins, paints, lacquers, and other medium-viscosity liquids. It is an ideal tool for modelers, painters, and anyone working with epoxy resins and…
Another one 26mm condenser mic capsule stand. Easy to print 15min thing. Mount the top part on the bottom one and use small amount of glue if you want. Fits to the TSB2555B capsule and BM800 body.
This project was inspired by Jerry Oltion's article in the September 2020 issue of Sky & Telescope, p. 74. These are two eyepieces for an astronomical telescope made from lens sets available from Surplus Shed (surplusshed.com). These are…
Soldering iron mount for the Minimalistic Heat insert press that can hold a parkside PLS 48 D2 soldering iron or others with 26 mm diameter.
I broke a connector on my child's playpen so I needed to get a replacement part, but couldn't find anything online for less than $20 and I wasn't sure they would fit. So, I designed this part. It has a 26mm opening on all sides and fits…
A model wheel inspired by the Alfa Romeo 75's wheels from the IMSA racing series. Perfect for vintage touring car bodies or custom RC projects. Specifications: Scale: 1/10 Width: 26 mm Hex: 12 mm (standard) Offset: +6, +7 Design:…
J'ai créé des tampon en TPU pour mon échelle en aluminium. Tampon pour profil alu de 76mm x 26mm/22mm.
Schublade für AMS Ständ mit einer Höhe von 126mm, dass sind 3 in 1
Ce capuchon carré de 26 mm a été conçu pour s’emboîter parfaitement dans des tubes ou profilés carrés de dimensions intérieures similaires. Il permet de protéger les extrémités, d'éviter l’entrée de poussière ou d’humidité, ou simplement…
Had a blank space over in my MDLR case. So created this fitting panel with some occult symbols on it.
Einfacher Haken für Heizkörper mit einem Röhrendurchmesser von 26mm. Zum Aufhängen von Handtüchern etc..
Modular Farbregal für 26mm und 35mm Ecke kommt gesondert
Simple mount for my outdoor lighting solar panel. The mount taper off from 31mm to 26mm diameter to fit a variety or different applications. I originally made it for the Home Depot Hampton Bay 3 LED Spot Light kit to mount it on a fence…
Custom Wheel design made in Fusion 360… 4 holes for hub connect at 2mm. rim = 41mm dia, 26mm wide.. Standard RC 1/10 size.
Default model is 26mm outer, 10mm inner. SRC file is included, adjust the parameters to your needs. Height can be adjusted manually. You basically want them to be a bit smaller than your bearing so that it fits tight.
UPDATE: I updated the model to allow for vertical tiling. Also I put four hook adapters on the back, but only use hooks on the top and the bottom ones are just for support. If you already printed some out, they are good for using as a top…
This if for my RYOBI 40V tool shaft extension. I pretty sure it will fit most of the tool brand with a 26mm shaft. Let me know if you need a larger diameter shaft and I will post it here :). The one you see in the picture is the small…
Telephone holder for Redmi Note 11 or for a phone with similar dimensions (159.9 x 73.9 x 8.1 mm (6.30 x 2.91 x 0.32 in)
Stöpsel um Leerrohre zu verlängern/verbinden. 26mm Aussendurchmesser 18,5mm Innendurchmesser
This is a version of my 26mm eyepiece but for a 2" focuser. This uses a lens set from Surplus Shed: https://www.surplusshed.com/pages/item/L3973.html This set consists of three lenses (eye, middle, field), and the following printed parts:…
This is a remix of the wall mount from @Sven_2545242 to fit with a 26 mm broomstick I recommend to print the main part with the flat (front) side down, 5 wall loops and 50-70 % gyroid infill. No support needed. Please also see the…
This easy-to-print faceted shaving brush handle will fit a 26mm knot. For added weight, print at 100% infill. Please post your makes. Enjoy Hole dimension: 26.2mm Diameter by 13mm Depth
Tube 26mm Replace Syphone Allum Destroy for Bidet
