1 / 1
IKEA KALLAX RAISER.26 - 26mm feet — image 1

IKEA KALLAX RAISER.26 - 26mm feet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

IKEA KALLAX 26mm feet to raise the new model to match the height of the old one

Rating
5 / 5
Likes
37
Downloads
168
Makes
1
Views
829
Reviews
1

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial

If you're a fan of IKEA furniture, you may have encountered a situation where you have an old and a new version of the same product, and they don't quite match up. This was the case for me when I had both an old and a new IKEA KALLAX 2x2, but found that the new model was slightly shorter than the old one.

To solve this problem, I decided to model and print some simple and sturdy feet to raise the new model to match the height of the old one. I settled on a height of 26mm, which would bring the new KALLAX to the same height as the old one.

Print with at least 3 perimeters and 20% Grid infill. The screw hole should fit any m4 (4mm wide) screw. I recommend ironing the topmost layer to ensure stability!

Print well and post your makes!

Tags