Fine Christmas ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fine Christmas ball. There are two ways of making it: The first way is either mechanizing the leafs with a 0.5mm…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
A fine Christmas ball.
There are two ways of making it:
The first way is either mechanizing the leafs with a 0.5mm metal sheet with the DXF (I made them with aluminum) or print them flat, using theflat versions of the leaf. Then give them the shape using the molds; the "corrected" version for the metal leafs, which compensates for the metal bending, and the normal version for the plastic leafs, a hot air gun and some patience.
The second way is to print the 1mm plastic version of it, only possible with a SLS printer and use the 1mm body to assemble them.
Then the leafs can be glued to the body using a good glue, I used cyanocrylate.
The ball is a little bit delicate and hard to assemble, but the result is well worth it.
I also designed a case to protect it during boring, non-Christmas time.
Category: Decor