EDC Magnetic Quick Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic quick connect. Quickly attach and detach anything that can connected with a keyring
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 87
- Wydruki
- 3
- Wyświetlenia
- 1047
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This print enables you to quickly attach or detach items from your keyring.
Model requires neodymium (rare earth) magnets:
2 x (5mm x 2mm) or
2 x (5mm x 3mm) or
2 x (7mm x 2mm) or
2 x (7mm x 3mm)
(see below for pull strengths).
Only the 5mm x 2mm has been tested as thats what was on hand. It’s fairly strong, though larger size recommended.
This has been tested by press-fitting magnets in to each end (pliers help here) But a drop of superglue wouldn’t hurt to help retain the magnets.
note: the two halves are not identical - one half the magnet protrudes slightly (Male) and the other half is recessed slightly (Female). This helps them couple properly and prevents wandering sideways.
Model is a parametric design so iterations of different sizes and magnetic strengths can be tested.
n50 neodymium magnet pull strength:
5mm x 2mm = 550g
5mm x 3mm = 784g
7mm x 2mm = 870g
7mm x 3mm = 1360g