Line Laser Servo Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Servo mounting assembly for line laser. The servo mount is designed to accommodate 25T micro servo. Plate is 25mm…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Servo mounting assembly for line laser.
The servo mount is designed to accommodate 25T micro servo. Plate is 25mm round with 12 mm hole spacing. Screws onto servo with a button M3 screw.
The laser mount will accommodate 12mm laser modules. For this purpose, I used Aixiz line lasers, e.g. see http://www.aixiz.com/store/product_info.php/cPath/54/products_id/382
The servo mounts were designed for MG996R servos but should fit similarly sized servos.
Print Settings
Printer:
Delta Spasm
Rafts:
No
Supports:
Yes
Resolution:
200 micron
Infill:
35
Filament:
Inland PETG
Pick your poison
Notes:
Supports are helpful for the laser and servo mount but may not be necessary if your bridging is good
Category: Electronics