Qidi Xmax Toolhead using Orbiter 1.5 and Dragon hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the toolhead for the Qidi Xmax rail conversion using a Orbiter 1.5 / Dragon hotend combo
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the toolhead used on the Qidi Xmax rail conversion, the original files were made for a BMG/Dragon combo , these are for the orbiter 1.5/Dragon, I changed some parts to remove weight and some others to increase rigidity, also I changed the cooling duct to a Prusa RHD model as I think will blow more uniform cooling, I use a klicky probe so I Included a mount for it but is optional. the probe offset is x=-3 , Y=-47 , Z offset should be calculated when testing, It will be around 9.5 . I'm using RRF3.4 on a duet 2 wifi board so I have more flexibility than the qidi board.