Qidi Xmax Toolhead using Orbiter 1.5 and Dragon hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the toolhead for the Qidi Xmax rail conversion using a Orbiter 1.5 / Dragon hotend combo
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 917
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the toolhead used on the Qidi Xmax rail conversion, the original files were made for a BMG/Dragon combo , these are for the orbiter 1.5/Dragon, I changed some parts to remove weight and some others to increase rigidity, also I changed the cooling duct to a Prusa RHD model as I think will blow more uniform cooling, I use a klicky probe so I Included a mount for it but is optional. the probe offset is x=-3 , Y=-47 , Z offset should be calculated when testing, It will be around 9.5 . I'm using RRF3.4 on a duet 2 wifi board so I have more flexibility than the qidi board.