Search results: xmax

Traxxas Xmaxx Impulse Pro-Loc MX43 Rings

I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.

XMax v3 Pro Carry Case

I received a request on reddit to make a case for the Xmax v3 Pro. The lid is fairly snug and has a nub that keeps it from sliding off on it's own. The body is slightly tighter than the cap so only the cap comes off when opening. I made…

XMax v3 Pro Filling Funnel

This slides over the top of a XMax v3 Pro flower vaporizer. It lines up with the oven so you can fill it more easily without getting crumbs all over

QIDI XMAX3 X-MAX 3 - BACK COVER- LARGER FAN

Based off of the updated back cover with fan. Increased fan size from 20x20x6 to 25x25x7 and added more vent holes. uses M2.5x9 button head or maybe m2.5x8 flathead screw. i made mine from ASA. Will make from a higher temp material when I…

Qidi XMAX 3 Rear cover fan mod 80x10

Rear cover fan mod 80 qidi X MAX 3 Rear cover model, to house a 80x10 fan, strategically placed for the cooling of the main processor and the 3 drivers of the electronics. As the fan is big, take it from low revolutions, it doesn't go…

Yamaha NMAX-XMAX Key Case

A simple key case to keep your motorcycle keys safe, since Yamaha NMax keyless "keys" are prone to damage. I printed with ABS and PLA and they work fine, but probably a hard TPU would work too. This is a cheaper and faster alternative for…

Traxxas Xmaxx / XRT Motor fans mount

My cousin got an XRT, and while it is the same frame/motor/etc it has a lower body than the X-Maxx so you need to V mount the fans it fits a 56mm motor and 40mm fans

Xmaxx wheel nut tool

My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock ones were falling apart. When I went to take off the stuck wheels I realized I had no idea where my wheel wrench had…

Hobbywing EzRun Max 5 ESC Mount for Traxxas XMaxx

Why? I didn't like the usual adapters that mount the ESC to the floor of the central chassis, because you always have to angle it upwards. In hard crashes it wobbled around. Additionally I needed the space in the central chassis pit to…

XMax v3 Pro carry case with screen and USB openings

I don't carry my vape around, but I still wanted a case to keep it safe when on my desk. The screen and buttons can be used normally and the device can be plugged in and loading. It's a good idea to use PETG or other heat resistant…

QIDI XMAX3 Plate Holder

This remix of the Stable Bambu X1C plate holder by Mark (which I use many for my X1Cs) has been remixed to fit the large Qidi 330 x 330 plates comfortably. Very stable with one or more plates installed.

QIDI XMAX 3 Exhaust 3" Fan Hose Adapter

This is a 3" hose adapter for the QIDI XMAX 3 and a corresponding low profile window exhaust. The window exhaust (and spacer) were designed specifically for my window, so likely you'll need to do some work on it if you plan to use it…

Xmax3 120mm fan back cover

The stock motherboard cooling fan for the Qidi Xmax3 is quite loud and always on. The motherboard does not have any extra programmable fan headers, so I designed this replacement back cover to install a silent 120mm fan in place of the…

Funnel for xmax v3 pro

Funnel for the XMAX v3 PRO Made due to spilling all the time.

Xmax v3 pro case (for different mouthpieces)

Protective carrying case for the Xmax v3 pro with glass/bong/standard mouthpieces. Please note: The caps do *not* fit on the original design from 4lan9 , i.e. you have to print the bottom part as well. There are different caps for…

Cuboo Stick (aka XMax V3 Pro) funnel

Funnel to help fill your Cuboo Stick (also known as XMax V3 Pro). I printed mine with PETG, “mouth” side down (see screenshot), no supports, 15% infill, 2 walls is enough. Designed in Autodesk Fusion, built with about 0.3 mm tolerance…

Traxxas Xmaxx proline ford raptor body tail protector

Specialy for the proline xmaxx body you need only 4 screws m3 or m4 20mm long

Spool Holder for QIDI XMAX 3

i try to make spool holder for my xmax 3. because always under extrude in ptfe tube.

Keychan Yamaha Xmax

Llavero de Xmax diseñado para cambio de color con 4mm. de altura y 3 capas superiores en la zona del logo, 60mm. de ancho recomendacion imprimir a altura de capa de 0.2mm.

XMax v3 Pro Adapter for 14mm Glass Pipes

This guy let's you connect your XMax v3 pro to any glass piece that accepts a 14mm bowl. Printed in TPU so the vape is held snug but easily removed by tilting to the side

QIDI Xmax3 Case Air Duct

Printed in ABS Like Resin but will also work on a normal FDM Printer. Support is needed. I would use 3lines and like 20% infill. Also use a Material for high temps cause its in a closed case.

Qidi xmax 3 logitech C270 webcam bracket

Bracket for Logitech C270 webcam to fit Qidi xmax 3. Fits onto suport rail front right of printer Filament Flashforge ASA Infill 30% Painted tree supports Slicer Orca slicer

Qidi XMAX Filament Guide

This piece fits around the legs of the stock X-MAX suitcase handles the spool mounts to. Add a length of guide tube and the length of the line will remain constant, and not hop off and tangle the spool. Print standing and it just takes a…

Traxxas Xrt/Xmaxx Large Battery Clamp

Fits perfectly in the chassis

Qidi Xmax 3 Drag Chain End Link

Replacement for the end link that connects the drag chain to the extruder on a Qidi Xmax 3. Recommend using a very strong filament e.g. PPA/HTPA. Changes made to geometry for support-free printing mean you will need to snip off the little…

Xmax V3 pro travel & accessory case

This model fits for the 3 different mouthpieces available (standard, glass and bong adapter). The inserts are interchangeable, e.g. combine batteries and stash tube+brush sleeve, batteries and mouthpieces or two battery compartments with…

DYI Traxxas Xmaxx Lighting Kit

Included are the 3d printed parts necessary for a DYI lighting kit I deigned for the Traxxas Xmaxx. This includes the parts for both headlights and tail lights. If you like this and would like to see something else, or if you have a…

Flat cap for 4lan9's XMax v3 Pro carry case

An alternative cap I made for 4lan9's carry case (or my remix with usb and screen openings) for carrying around the device with no mouthpiece. This is useful when you use something else than the default one or switch between them. For…

qidi xmax 3 back cover 3006 fan

xmax 3 rear cover for 3006 fan

Support BEACON 3D normal Rev H QIDI Xmax 3

Support du scanner BEACON 3D normal Rev H pour la QIDI Xmax 3

Xmaxx Snow Plow

I always wanted a snow plow for my Xmaxx but some of the online rigs were way too expensive. So with some inspirations from some other designs here's one with a 15° angle to push snow off to the side. Sized for M5 hardware. No supports…

Xmax v3 Herb Funnel

Recommended Print Settings: Around 0.175mm Layer Height .4mm nozzle 3 wall lines Brim or Raft Enabled Generate Support Enabled Post Print Processing: Use a knife or tweezers to remove all of the support material and plastic hairs to…

Front Cover and Cap XMAX3 QIDI

This is a simple enclosure to prevent stuff falling in the front case of the printer. There is a big gab and i had to get mutliple small parts and junk out of it. Now its closed so no problem anymore. The caps you can secure with a trop…

XMax V3 Pro Charging Dock

This dock allows you to route a USB cable into it so you can drop your XMax v3 Pro on it to charge. The USB-C hole is larger than most plugs on purpose so most will fit. Use a small amount of glue to secure the cable in place. I suggest…

Traxxas Xmaxx GoPro Camera Mount

This is a mount made to protect your gopro by placing it inside the Traxxas Xmaxx. You do have to cut the windshield out of a body, but after that the mount is extremely adjustable. It can be moved forwards, backwards, and the camera can…

XMAXX MEGA TRUCK TIRE

208 mm diameter - Currenlty printing it for trial run. Updated wheel rim for fitment 2/17 now works

Qidi Plus4 Toolhead Carriage for Xmax3 Hotends

I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4) Later on I heard that it is 4mm short. So I Stewy helped me with…

XMAX v3/v4 Pro Dosing Capsule 6 Pot Filler

I reccomend you use over a rolling tray as you usually put too much in. comes with 6 as i bought a 5 pack + the original one they give you. Pots fit loosely and the spreader tool's back acts as a packer, 2 packs per pod 180 degrees from…

Qidi XMAX3 Filament Runout and Post Extruder cutter (4mm bearing)

Only a remix of the original extruder cage to allow the usage of a 4mm bearing with a Omron D2F-L switch. I didn't have 5mm ball bearing and was missing the predrill for the switch. Additionnaly, if you have an inductive Probe on your…

QIDI XMAX3 Rasp PI SD Camera Holder

This is a mount for a Raspi camera (original version) will seat a 1"x1" board. Put a channel top and bottom for routing the cable away from the belts depending on the install orientation.

Traxxas XMAXX Rear Body Protector

Helps during rollovers that put stress on the unprotected rear part of the body. You can drill a hole for what sized screw you are going to use. I used a big bolt because that's what I had lying around, but I'm sure a smaller one could…

Qidi XMAX3 Spanner and Hex Key Holder

Just an addition to the available side mount tool holders to hold the wrench and hex keys.

Xmaxx plaque immatriculation

Plaque d'immatriculation "589" pour Traxxas XMAXX Adapté pour 2 vis M2x4 (2mm) Percer le par choque avec une mèche de 1.5mm et visser directement dans le plastique. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports:…

Qidi XMax3 4 inch carbon filter duct *Beta*

Larger duct for qidi carbon filter

Qidi XMAX3 toolhead-pcb spacer

This part is a spacer located at the back of the toolhead, between extruder mount and PCB. It broke when I replaced the PCB with the new one, so I had to design this replacement. Printing it in ASA, ABS, or PC is recommended.

Friction fit PTFE coupler for Qidi XMAX 3 filament cutter

I like the original designs filament cutter and the fact I can automate it. Though I couldn't reliably print the bowden coupler part. Anyway I manually load/unload the filament so it's better for me to easily plug out the PTFE tube. I…

Back panel wiring clips Qidi XMAX3 (and other)

The original clips broke the first time I removed them. I designed these to replace them. It is recommended to print them in PETG or ASA

Vape brush sleeve & pushing aid (xmax v3)

Protects your cleaning brush from bending and nasty pocket fluff. Use smaller side to gently compress the herbs in the heating chamber. It also fits nicely through the funnel hole of this great xmax v3 funnel/stand . Use the round handle…

Qidi Xmax Toolhead using Orbiter 1.5 and Dragon hotend

This is a remix of the toolhead used on the Qidi Xmax rail conversion, the original files were made for a BMG/Dragon combo , these are for the orbiter 1.5/Dragon, I changed some parts to remove weight and some others to increase rigidity,…

Qidi Xmax 2 Filament Drybox Holder Arm Remix

This is a remix of the drybox holder arms to work with a Qidi XMax 2 with a filament runout sensor. It will use the original sized holder bed from the original model author without any changes. These arms include an offset to account for…

XMAX Starry v3 Vaporizer Grip Case -TPU

A case/grip for the XMAX starry v3 vaporizer Designed for use with TPU Printed with no supports, use tree for window if necessary

XMax V3 - Dosing Capsule Set Lid

Stock lids were very loose. Print with PETG or another rigid filament. Pops in easily, pops out with two thumbs on either side.

Qidi Xmax3 Super pinda mount

The original Qidi inductive probe failed on my printer and i had a Super pinda laying around from another project. Dimensions have been taken from the original Qidi mount, so no need to edit the printer.cfg as the X/Y offset is the same.…

QIDI XMAX3 BTT MicroProbe mount

По сути это перерисованный кронштейн с моими изменениями. Оригинальную модель не удалось экспортировать в твердое тело и я просто оцифровал эту модель и изменил ее исправив некоторые моменты. Схема подключения выглядит следующим образом:…

XMAX V3 Nano filling funnel

Nothing special, i just have pretty shaky hands and didn't see much else made for the nano so threw this together. It roughly doubles the opening size which for me i found to be enough.

Xmaxx Battery Holder with Straps

With this holder, the batteries can be attached to the compartment with straps instead of the original temples. Similar systems can already be bought as accessories from third-party manufacturers. However, I didn't want to drill into my…

Spool Holder for QIDI XMAX 3_EXTENSION

extension spool for this.. https://www.printables.com/model/929110-spool-holder-for-qidi-xmax-3 Because monopiece filament spool hole is smaller than standard spool filament.

Manta M8P/M5P Mount for XMax3

NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…

Custom Xmax tree decoration

Custom Xmax tree decoration Print Settings Printer: Artillery Hornet Rafts: No Supports: No Infill: 20 Category: Decor

Spool spacer for QIDI XMAX 3

QIDI XMAX 3 spool mount takes the dry-boxes but does not match spools. This spacer (2 parts) fills the gap. One part fills the space between the mount post and the other part meets the post closure.

POTV XMAX V3 Pro Thin Case

XMAX V3 Pro Gridfinity Bins

An assortment of Gridfinity bins for the XMAX V3 Pro vaporizer. Some technical details: These bins were designed for the “Plus” version with a glass mouthpiece and a redesigned cap. The storage bins for the body only (no attached…

QIDI XMAX3 - CHAMBER HEATER FILTER BOX

I used ASA. Supports are needed. separate the heater from the fan. use those 4 screw to attach heater box parts list Qidi chamber heater(heater and fan) 2x HEPA filter(80mmx40mmx15mm) 6x m4 threaded heatsert 6x m4 x25mm flat head cap…

3kg Spool Rod for Qidi XMAX3

Rod mounts in standard location on the rear of an XMAX3 to allow for use of a 3kg spool, without the drybox. Category: 3D Printer Accessories

Vaporizer Box for Storm / XMax V2 models

This is a container I made for my husband. It fits both brands of pen-like portable vaporizers Storm and XMax V2. I designed two versions, one with a shorter cap (tappo) and one with a longer cap that can host a smaller container for…

Qidi Xmax 3 toolhead rework

This is complete rework of tool head to ensure printer is fully capable to operate safely at its max chamber temperatures as well as able to have multi material support (cutter+tool head sensor). I have tested cutter and it works on…

Qidi xmax3 x-max3 x-max-3 spool holder

Require: PC4-M10 PTFE Tube Connector

XMAX V3 Pro Thin Case with dosing capsule holder

Qidi Xmax3 - Exhaust fan blanking plate

I wanted to mount a Nevermore V6 in my Xmax3. So i designed this blanking plate that does double duties. Both blanking off the exhaust fan hole and has mounts for this Nevermore V6 holder.…

Qidi X3 Series XMax3 Mounting adapter for Mellow LLL Filament Buffer

Qidi has such a long filament path and the drag affects print quality sometimes. Thatswhy I decided to use a filament buffer device. I print ABS but you're good to go with PLA or other shit you have laying around. Very simple CAD model…

QIDI XMAX-3 EXHAUST -FILTER - CHARCOAL CARTRIDGE

Filter box that uses carbon filter cartridge like “5Pcs 3D Printer Activated Carbon Air Filter Purifiers for Lab P1P P1S X1 P1” from amazon. used ABS, 0.4 NOZZLE. layers variable(not important), needs supports for filter opening. Needed…

XMAX Starry Tool (Pokey Stick) Attachment

I got frustrated by the fact that there's no simple way to bring the pokey stick ("tool") along with the handy heater. This holder attaches to the bottom of the device, allowing you to "click" the stick into place. The model has been…

XMAX V3 pro case with cartrige storage

XMAX V3 pro case which fit tightly to the vaporiser. Lid contains storage for four cartridges secured by small lid using magnets. Print info: recommend material: PETG (as vaporiser get hot during using) 0.2 layer height 2 * 10x10x5 cube…

Pixmax 720 / Jinko JR 720 vinyl cutter pen holder & spacer

We bought a vinyl cutter from Monster Shop for our hackspace which from their excellent manual seems to suggest it's a Jinko JR but rebadged as PixMax. As such, the machine needed a few 3D printed bits to keep everything together. Whilst…

XMax V4 PRO - Debowler and ABV container

XMax V4 PRO - Debowler and ABV container Print Settings: 0.2 mm Layer Heigh 5 Perimenters 5 Bottom Layers 5 Top Layers 30% Gyroid Sparse Infill Pattern Ironing Top Surfaces (Important!) No supports No brim EXTRA: For better grip and a…

Xmax Ace Loading Funnel

Another design for a friend's Xmax Ace vaporizer. This is a basic loading funnel which sits on top of the device, allowing easier loading of material without spilling. I've found this design prints well upside down without supports in…

Simple Pixmax frame plug cap

a simple plug / end cap for the bottom frame of the Pixmax plotter just above the wheel

Vape : XMax V3 Pro Case With Dosing Capsules Holder With Cap

Took the great job already done ( https://www.printables.com/model/1344065-xmax-v3-pro-thin-case-with-dosing-capsule-holder ) and modified the dosing capsule holder part of the model, to accept the Dosing Capsules Holder with a cap (…

QIDI Xmax top bearing holder, for larger 11 x5 x4 bearing

This is just a bearing adaptor for the top Z bearing of the Qidi Xmax, it will hold a 11x5x4 bearing that you can get from a smooth pulley, the original bearings are really small and start having too much play after some time , these will…

Vape : XMax V3 Pro Dosing Capsules Holder

Overall length is 72mm for standard version when the cap is fitted and designed to hold a maximum of 6 dosing capsules used with the XMax V3 Pro Vape. I have done another variant, that is 88mm when cap is fitted, specifically for using…

Xmax Ace Vaporizer Stand

UPDATE 9/12/24: Added improved version with higher walls and accessible USB charging port. Quick model for a friend who was after a stand for their Xmax Ace vaporizer so it could be fixed to a board and used with a waterpipe adapter. I've…

QidiTech-XMax3 Filamentbox Wall-Mount

This model allows you to mount the QidiTech filament box directly on a Wall behind or next to your printer. This makes changing the filament more convenient because you don't have to reach behind your printer to unlock the filament box.…

Qidi Xmax3 Read Printhead Cover Remix to 30mm Winsinn fans

I had 30mm winsinn fans on hand so I remixed the cover to use them

Qidi Xmax3 Noctua Motherboard fan remix

As mentioned this just supports mounting the noctua a12x25 120mm fan. I mounted mine on the outside from the inside using the supplied screws. I could have modeled a small hole in for the cable routing but am using a slot instead. It…

Qidi XMAX 4 Display stabilizer

einfach aber effektiv.

Xmax V3 Pro case with sliding lid

This is a case with sliding lid for the xmax v3 pro. IIt has space for the vape, 2 extra batteries, the cleaning brush, and extra ovens.

qidi xmax 3 back cover 3006 fan

xmax 3 rear cover for 3006 fan

Friction fit PTFE coupler for Qidi XMAX 3 filament cutter

I like the original designs filament cutter and the fact I can automate it. Though I couldn't reliably print the bowden coupler part. Anyway I manually load/unload the filament so it's better for me to easily plug out the PTFE tube. I…

XMAX V3 Pro Thin Case with dosing capsule holder

depending on your printer you may need to add tree support to the under edge of the dosing capsule holder area. via paint on supports. v2 wont need supports really. i have added a v2 version after printing i found it was a bit tight for…

XMAX V3 pro case with cartrige storage

XMAX V3 pro case which fit tightly to the vaporiser. Lid contains storage for four cartridges secured by small lid using magnets. Print info: recommend material: PETG (as vaporiser get hot during using) 0.2 layer height 2 * 10x10x5 cube…

XMAXX MEGA TRUCK TIRE

208 mm diameter - Currenlty printing it for trial run. Updated wheel rim for fitment 2/17 now works

XMAX v3/v4 Pro Dosing Capsule 6 Pot Filler

I reccomend you use over a rolling tray as you usually put too much in. comes with 6 as i bought a 5 pack + the original one they give you. Pots fit loosely and the spreader tool's back acts as a packer, 2 packs per pod 180 degrees from…

Qidi Xmax 3 toolhead rework

This is complete rework of tool head to ensure printer is fully capable to operate safely at its max chamber temperatures as well as able to have multi material support (cutter+tool head sensor). I have tested cutter and it works on…

Qidi Xmax3 - Exhaust fan blanking plate

I wanted to mount a Nevermore V6 in my Xmax3. So i designed this blanking plate that does double duties. Both blanking off the exhaust fan hole and has mounts for this Nevermore V6 holder.…

xmaxx lower a arm

xmaxx a arm 3d scanned

Traxxas Xmaxx

For people who wants the fans put vertical.

Xmaxx Repair Stand

Since I didn't have a real stand for my Xmaxx and I found the original one from Traxxas too impractical, I built something myself. As a template, I took the standard RC car stand. In addition, I modularized the entire booth a bit. This…

RC 1/8 Wheel Hub Safty (Traxxas Xmaxx)

I have to disassemble the wheels of my Xmaxx for transport in the car. I transport it in a large bag, the wheel hubs press very hard against the bag. To prevent it from getting a hole, I designed these saftys.

Traxxas xrt/xmaxx steering toe links

Hardened design, Fits PERFECTLY

Xmaxx Wall Hanger

Device: Printed on Elegoo Centauri Carbon. Infill/Strength: Set to 40% due to weight of vehicle Filament: PLA Plus This model can also be reduced slightly to fit the Traxxas E-Revo 2.0. Added a 3rd screw hole to prevent the hanger from…