Replacement Clamp for CrudCatcher Mud-Guard - for oversize Seatpost
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created for a friend who found the supplied clamp for his mudguard did not fit his oversized seat post on his MTB
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Created for a friend who needed to fit an existing crudcatcher mudguard, to an over-sized (31.6mm, I believe) seat post.
This was adjusted a couple of times to give a little more clearance. I thing PETG would probably be ideal for this, as we found PLA ones failed quite soon. That said, it's quick and cheap to print a few spares. Feel free to adjust to suit.
I hope this helps. Please leave a like if it does, and post any makes or remixes.
All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited.