Replacement Clamp for CrudCatcher Mud-Guard - for oversize Seatpost
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.96 – €2.39 net (excluding VAT)
For file: ClampStrong_2h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.17 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 2.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Created for a friend who found the supplied clamp for his mudguard did not fit his oversized seat post on his MTB
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Created for a friend who needed to fit an existing crudcatcher mudguard, to an over-sized (31.6mm, I believe) seat post.
This was adjusted a couple of times to give a little more clearance. I thing PETG would probably be ideal for this, as we found PLA ones failed quite soon. That said, it's quick and cheap to print a few spares. Feel free to adjust to suit.
I hope this helps. Please leave a like if it does, and post any makes or remixes.
All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited.