1 / 5
Apple Watch Charger Add-On for the Fulaim iPhone Magsafe Charger Holder — zdjęcie 1
1 / 5

Apple Watch Charger Add-On for the Fulaim iPhone Magsafe Charger Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This little add-on charges your Apple Watch neatly right next to your iPhone in an elegant and unobtrusive way.

Ocena
0 / 5
Polubienia
10
Pobrania
62
Wydruki
0
Wyświetlenia
696
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

NOTE: There are a few different sized original Apple Watch chargers available. This bracket only works with the charging puck with these dimensions:

27,7mm diameter and 7,5mm height.
 

Print with added perimeters (added strength in the thin arms) and consider ironing the last layer for a clean finish.

Thread the USB-end first through the hole and then press the puck in the recess.


Use strong double sided adhesive (foam-) tape to add the holder to the stand. The cable can be organised with zip ties and -anchors like these: https://www.printables.com/de/model/283591-small-zip-tie-anchor

You may also need to use some double sided tape to hold the watch charger flush in the bracket, depending on your print result.

Tagi