Flush 2PST or SPST Slider Switch for the Hit Box Smash Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: turns out it only is a 2 way switch i used. updated version coming once i source another switch This is a slider…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
*NOTE: turns out it only is a 2 way switch i used. updated version coming once i source another switch*
This is a slider switch holder for the Hit Box Smash Box to replace the stock toggle switches. I made this because I wanted a switch that could not be bumped into a different position on my controller.
The standard version is unrestricted allowing for a standard on-off-on switch, whereas SwitchHolder1Pos restricts the switch to on-off.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.15mm
Infill:
100%
Filament: Hatchbox PLA Black
Notes:
Only SwitchHolderBottom.stl requires support. Print at .15mm layer height for best results
Parts Needed
- 1x slide switch 1x JST-XHP 3 Pin Housing and 3x Female Pin Connectors (you can find a variety pack on [amazon](https://www.amazon.com/Hilitchi-Housing-Connector-Adapter-Perfectly-Compatible/dp/B015Y6JOUG?tag=thingiverse09-20)) 1x crimpers. I am a fan of [this pair](https://www.amazon.com/gp/product/B078WNZ9FW?tag=thingiverse09-20)
Category: Video Games