1 / 2
Patio Table Glass Supports — zdjęcie 1
1 / 2

Patio Table Glass Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I noticed that the plastic supports holding the glass surface of my patio table have been breaking and falling off.

Ocena
0 / 5
Polubienia
3
Pobrania
36
Wydruki
0
Wyświetlenia
412
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I noticed that the plastic supports holding the glass surface of my patio table have been breaking and falling off. I took one of the broken ones, made some measurements with some guesses as to the screw hole size and center location, and printed one off. It appears to fit my table pretty perfectly. Now I am printing a set of 6 in PETG to replace the rest of the failing ones.

Print instructions

  • PETG / ABS for outdoor use, not PLA
  • 0.30mm DRAFT for speed
  • 20% grid infill
  • No supports or brim needed

If they do not hold up, I will be modifying the print settings to use:

  • 0.20mm QUALITY
  • 30% gyroid infill

Tagi