1 / 2
Patio Table Glass Supports — image 1
1 / 2

Patio Table Glass Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.38 – €0.46 net (excluding VAT)

For file: table-glass-supports-v1_03mm_petg_mk3s_27m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.42 excluding VAT (range midpoint).

Weight reported by the author
5 g
Print time reported by the author
27 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

I noticed that the plastic supports holding the glass surface of my patio table have been breaking and falling off.

Rating
0 / 5
Likes
3
Downloads
36
Makes
0
Views
413
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I noticed that the plastic supports holding the glass surface of my patio table have been breaking and falling off. I took one of the broken ones, made some measurements with some guesses as to the screw hole size and center location, and printed one off. It appears to fit my table pretty perfectly. Now I am printing a set of 6 in PETG to replace the rest of the failing ones.

Print instructions

  • PETG / ABS for outdoor use, not PLA
  • 0.30mm DRAFT for speed
  • 20% grid infill
  • No supports or brim needed

If they do not hold up, I will be modifying the print settings to use:

  • 0.20mm QUALITY
  • 30% gyroid infill

Tags