4040 - M3 T-Nut - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Olafelchs T-Nuts without the need for supports. T-nut for 4040 8mm slot profile for M3 screws
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 326
- Wydruki
- 4
- Wyświetlenia
- 1074
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I've printed the orignals, they were a little bit to high for my extrusions, so this is 0.5 lower.
Added a hack for supportless printing as well. Just poke through the hole after the print is done.
Included printfile is for 12 instances.
Quote from the original with one correction:
"Commercial M3 t-nuts for 4040 aluminium profile are quite hard to find. This quick print solves the problem.
Print them standing up and withOUT supports (to improve the quality of the nut cutout). It's a good idea to print a small batch in one go as the part is small and you can easily hit minimum layer time issues. The nut cutout is a fairly tight fit - you don't want the nut falling out while you are putting the part into the t-slot - so you will probably need to pull it into place with a screw from the top."