Stake Out Pole Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swing out of the way stake out pole holder for kayaks that have a gear track. Holder is long enough to reach over…
- Ocena
- 4,5 / 5
- Polubienia
- 44
- Pobrania
- 449
- Wydruki
- 0
- Wyświetlenia
- 2105
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A swing out of the way stake out pole holder for kayaks that have a gear track. Holder is long enough to reach over the side of wider kayaks. Can be mirrored for the left side if desired to swing backwards but functions fine on either side as is.
Printer: Creality Ender 3 V2
Nozzle: 0.6mm
Filament: Overture PETG
Perimeters: 4 or better for strength, 6 or better if using 0.4mm
Infill:20% or better in a structural infill such as gyroid.
Parts needed: 2 Stainless T Bolts with knobs
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20%
Filament:
Overture PETG
Orange
Notes:
Printed at 6 layers for complete piece of mind about strength and durability. Holder as been tested numerous times without failure during strong winds and heavy current. PETG has shown no problem for durability and color fade despite being attached to an uncovered kayak on a trailer for months.