Scuba DIN Valve cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN Valve Scuba Tank and Regulator. USA DIN valve Dust / Weather cover for Scuba Tank Valve and for Scuba Regulator.…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 275
- Wydruki
- 2
- Wyświetlenia
- 986
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
DIN Valve Scuba Tank and Regulator. USA DIN valve
Dust / Weather cover for Scuba Tank Valve and for Scuba Regulator.
It took a little bit of research to get the correct threads. After that this was a simple drawing.
The tank cover must have air release holes so if the tank is accidentally opened with the cover in there will not be an issue with pressure.
If the threads are a little tight scale them up or down 1% as needed. These files are to true DIN tread dimensions.
If you want some Roll Control for your scuba tanks: https://www.thingiverse.com/thing:5452401
Print Settings
Printer Brand:
Raise3D
Printer:
Pro2
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.40
Infill:
15%
Filament: Matter Hacker Build PETG Red
Category: Sport & Outdoors