1 / 2
Skadis Soldering Station: Pinecil (x2) and Hakko Tip Cleaner (uses heat set inserts) — zdjęcie 1
1 / 2

Skadis Soldering Station: Pinecil (x2) and Hakko Tip Cleaner (uses heat set inserts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

10,02 € – 12,25 € netto (bez VAT)

Dla pliku: Skadis Pinecil Holder_0.2mm_PETG_MINI_11h22m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 11,13 € netto (środek widełek).

Masa podana przez autora
144 g
Czas druku podany przez autora
11,37 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Ikea Skadis holder for two Pinecils and a Hakko tip cleaner, using heat-set inserts and printed hooks for mounting

Ocena
4 / 5
Polubienia
47
Pobrania
118
Wydruki
1
Wyświetlenia
1733
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

Skadis holder for two Pinecils and a Hakko 899 tip cleaner, with a bonus tiny platform that can hold a Miniware MHP30 mini hotplate.

Nice companion for mounting below the Skadis Pinecil tip holder: https://www.printables.com/model/287843

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

Printing Notes

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.

Tagi