Skadis Holder: Hookup Wire Spools, x6 (uses heat set inserts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Skadis holder for six small hookup wire spools, using heat-set inserts and printed hooks for mounting
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 947
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Skadis holder for six small hookup wire spools, like the ones included in Adafruit's basic Hook-up Wire Spool Set.
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and an additional 4x M2.5 heat-set inserts and M2.5 screws for securing the top plate.
Required Parts
- Printed hooks
- See linked project for more details
- M2.5 heat-set inserts (x2 or x4 for mounting, x4 for assembly)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- Prusa Eshop ($11.99, 100 pcs)
- CNC Kitchen Store (€9.99, 100 pcs)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- M2.5 8mm screws (x2 or x4 for mounting)
- McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)
- M2.5 6mm screws (x4 for assembly)
- McMaster Carr 92000A104 (6mm, $4.69, 100 pcs)
Assembly Notes
Once printed, just cut the “spool rod” (usually a length of plastic tubing) to length to fit snugly into the printed box then drop it in with the spools on it. Pretty simple! :)
The top plate is optional but helps to keep the spools in place while dispensing wire. I found that printing and assembling it was worth the time but I had a bunch of extra M2.5 screws on hand, so YMMV. :)
Printing Notes
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.