1 / 2
Skadis Holder: Hookup Wire Spools, x6 (uses heat set inserts) — image 1
1 / 2

Skadis Holder: Hookup Wire Spools, x6 (uses heat set inserts)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea Skadis holder for six small hookup wire spools, using heat-set inserts and printed hooks for mounting

Rating
0 / 5
Likes
27
Downloads
86
Makes
0
Views
952
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Simple Skadis holder for six small hookup wire spools, like the ones included in Adafruit's basic Hook-up Wire Spool Set.

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and an additional 4x M2.5 heat-set inserts and M2.5 screws for securing the top plate.

Required Parts

  • Printed hooks
    • See linked project for more details
  • M2.5 heat-set inserts (x2 or x4 for mounting, x4 for assembly)
  • M2.5 8mm screws (x2 or x4 for mounting)
  • M2.5 6mm screws (x4 for assembly)
    • McMaster Carr 92000A104 (6mm, $4.69, 100 pcs)

Assembly Notes

Once printed, just cut the “spool rod” (usually a length of plastic tubing) to length to fit snugly into the printed box then drop it in with the spools on it. Pretty simple! :)

The top plate is optional but helps to keep the spools in place while dispensing wire. I found that printing and assembling it was worth the time but I had a bunch of extra M2.5 screws on hand, so YMMV. :) 

Printing Notes

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.

Tags