Voron Galileo - mount for umbilical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows mounting an umbilical to a Galileo extruder (possibly CW2, too)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I added a toolhead board to my Galileo extruder, and the reduced wire-count suggests to move to an umbilical instead of an energy chain. This mount guides a sleeved wire bundle. My umbilical enters the chamber at the top, through the exhaust opening, and is supported by a gallows. It needed a steady mount at the extruder.
This has no hardware requirements. I put the wires into a standard polyethylene sleeve to protect the wires.
The toolboard is an EBB36 mounted with https://www.printables.com/model/261263-voron-stealthburner-galileo-ebb36-side-mount
The gallows is https://github.com/GalvanicGlaze/Voron_Mods/tree/main/Trident%20Bowden%20tube%20PTFE%20guide