Voron Galileo - mount for umbilical
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows mounting an umbilical to a Galileo extruder (possibly CW2, too)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 1,491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I added a toolhead board to my Galileo extruder, and the reduced wire-count suggests to move to an umbilical instead of an energy chain. This mount guides a sleeved wire bundle. My umbilical enters the chamber at the top, through the exhaust opening, and is supported by a gallows. It needed a steady mount at the extruder.
This has no hardware requirements. I put the wires into a standard polyethylene sleeve to protect the wires.
The toolboard is an EBB36 mounted with https://www.printables.com/model/261263-voron-stealthburner-galileo-ebb36-side-mount
The gallows is https://github.com/GalvanicGlaze/Voron_Mods/tree/main/Trident%20Bowden%20tube%20PTFE%20guide