Liczymy pasujące modele…
If you like the design, support is much appreciated (: buymeacoffee.com/MadMango __________ GALILEO'S GLOBE I have seen the wooden version of this 3D puzzle before and enjoyed it so much, that I've decided to create 3D printable version…
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…
Check the published mods, you may want some of them right from the start! The improved stage movement is ESPECIALLY recommended :) This project is about an affordable, expandable and customizable microscope based around basic hardware, 3d…
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
PUG mount based on hartk's PG7 mount that uses the new standoff mounting location (other PUG mounts hook into the extruder motor threads, which is not recommended). Tested with LDO Nitehawk-SB If you have an SB2209 RP2040 see Ozuwara's…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
Statue of Galileo Galilei. Original by Pio Fedi. Found inside the main entrance to the Lanyon building of Queen's University Belfast. About the statue: "A colossal statue in Carrara marble. The celebrated astronomer is represented in the…
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
A cable cover for Galileo 2 with holes for ventilation/cooling a canbus board. I use a Mellow SB2040. Untested for other boards. Will upload photo's soon
Remix to add support for the connector as well.
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
Maintain a unique style of Stealthburner. No screws reguired.
This mod addresses some useability downsides with the dual M5 screw movement of the standard module. The independent rack and pinion movement for x and y prevents the binding issue of the two interconnected knobs, and the new gears…
Merged Hartk's G2E umbilical with the PUG connector
This is an altered version of my Afterburner Galileo extruder for the new Voron Stealth Burner toolhead. This accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit…
Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.
Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…
EBB36 mount for Galileo 2 standalone extruders
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
a revised version from the first i made. small improvements and in easier files to print. used with M3 screw inserts. Fits ipad pro 11". but u can cut it down to fit smaller screens.
UPDATED 4/13/2024 to comply with G2E Release 1.0 This is a combined version of Baze_24616 & hartk PG7 Umbilical for use with CNlinko LP-12 8-pin connector and a mounting location for 3DO Nozzle Camera Board. STEP file included.
NOT TESTED, WAITING FOR PARTS !! ONLY FOR TESTING !! now I'm editing for Filametrix mod… Sensor before extruder - only click Sensor after extruder - screwed For assembly: 2x sensor D2F-5 2x ball 5,5mm 2x tapping screw M2x10
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
About Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland Not a biggest fan of PG-7 cable glands (like me) and willing to make safe and secure LDO Nitehawk-SB USB cable strain relief using Galileo 2 Extruder ? This one is…
Print using standard Voron recommended settings for toolhead components.
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…
I didn't feel like removing my cable chains or worrying about Z chain clearance, so I made this side mount for the BigTreeTech EBB36 CAN board that fits on the galileo extruder . Print in orientations provided. You'll need three m3 heat…
This version of the Afterburner Galileo extruder accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit Carrot Feeder as a filament sensor. Can be printed in ABS+ or…
DEPRECATED! User @morpion on discord came up with a simpler and more practical idea which is currently published on github here: https://github.com/XVIIarcano/Galileo-Microscope/tree/main/Mods%2FOptical%2FAccessorized%20focus%20knob If…
The EBB card with its USB socket on the front does not allow assembly with the standard body of the Galileo 2. The pcb displayed is that of a classic SB type CAN card. The EBB SB2209 USB card not having been modeled by Bigtreetech, I did…
Galileo 2 SA (StandAlone) https://github.com/JaredC01/Galileo2/tree/main/galileo2_standalone drive component for EVA3 toolhead. The G2SA is still in beta so there is posibility that when changed the component will change too. To be used…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 extruder. The original PUG download page (for the gland itself) is at…
Use the F623ZZ bearings from the original siboor cable chain swivel, an m3 heat set and a M3x16 BHCS. Placing the heatset can be a bit tricky, be careful not to damage the swivel. Print orientation as in the .stl, Voron standard settings.…
Modifikace dílu Voron Galileo 2 Extruder - front_body_ECAS_coupler Runout sensor -5mm ocelová kulička a mikrospínač, mechanické provedení nemá problém s průhlednosti vlákna. v2 - přepracováno, přidáno zúžení pro lepší vedení filamentu. v3…
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…
The original "G2E PG7 Mount SB2040 3010 V1.5.stl" was not a single, solid design - parts of it were floating. I made some small tweaks to the Fusion 360 file (included) to make it a single, printable piece.
This mod only replaces the design of the base module adding some internal space, screws for the rubber feet and for locking the pipes are unchanged froom the standard version. You will need: - One set of printed parts, printed using the…
add for ercf, Only modify the main body Additional: 3x4x5 brass nuts X2, M3x4 0.4mm flat head screws X2, PCB
The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
I was getting high temperatures (over 85C) on my EBB SB2209 RP2040 board. Running the toolhead without the cover on didn't seem to help so I added a fan to the cover. I only had 3010 blower fans to hand so I made this as an alternative to…
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…
This PG07 type cable support is intended to be super lightweight, so is thin and requires a strong filament with good layer adhesion for best results. I've had no trouble with ABS, but others report some cases of breaking along layer…
Cable and board cover, for the Galileo 2 extruder for the Nitehawk - SB.
this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.
See the FilamATrix Github for additional info and other needed modded parts (includes parts to support the EBB SB2209 USB board). See the EBB SB2209 USB GitHub for additional info and other needed modded parts if not using the FilamATrix…
Replaces cablechain with PG7 gland for umbilical. Most other mounts infere with Z-cablechain. This mounts cable gland on the side of extruder motor, using minimal amoun of valuable Y dimension. No need to remove Z-chain. As sturdy mount…
4 Different Models -With or Without Vents- -With or Without M3 Heat Set Insert Holes-
A remix from the great Afterburner Galileo Clockwork /EDIT In the files you will also find a variant for assembling an original Orbiter Extruder, so you don't have to print the printed parts that depict the Orbiter, but only what is…
I believe this design avoids some of the issues that are present in other Galileo 2 compatible board-fan mods. Features of this one are: True to Original: Started with JaredC01's official CAD file, and attempted to make the fewest,…
A remix from dominic_97 Category: 3D Printing
A remix of Liselotte111's hexagon door cover with an added 3mm thermistor clip for the chamber temperature.
A very simplistic pug mount for g2e working with btt sb2209 can
To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.
Step Aboard the Galileo Prepare to launch with this model of the Galileo shuttlecraft, an iconic auxiliary vessel stationed aboard the U.S.S. Enterprise in Star Trek: Strange New Worlds. Bridging the gap between 1960s retro-futurism and…
BTT modified the Stealthburner Cable Cover for use with their EBB 2240_2209 Board. My board gets 85°C hot when printing. Therefore I took the redesigned cover from BTT and the remixed version from Sven Kah and made a remix to fit the…
SB PCB/Galileo2 Strain relief mount zip tie locations that sit flush with the mount use CNLINKO M12 quick disconnect or M12 strain relief
This is a modified cable cover that allows you to mount the chamber thermistor for the LDO tool head PCB to the cable cover of the Galileo 2 extruder on your Stealthburner tool head. This is a remix of both the LDO Nighthawk cable cover…
Hardware: 5015 fan mount: 2x M3x20mm + washers 5015 duct mount: 1x M3x8mm or 10mm 5015 duct to the main bracket: 3x M3x8mm Hotend duct mount: 1x M3x8mm Endstop: 2x M3x8mm Main bracket to rail: 4x M3x12mm + spring washers + wide washers V6…
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
An insert for Galileo Galilei with bins to put right on the table. V2 Out now: Support for sleeved cards of 73x122mm ( https://boardgamegeek.com/boardgame/393333/galileo-galilei/sleeves ) scale up 1mm the cards if you use 73x122 unless…
https://www.youtube.com/watch?v=ime0QRmLQDA This mod was designed and optimized specifically for the following configuration: Toolhead: A4T Carriage: XOL Extruders: Galileo 2 (WWG2) A beta version of the mount for Orbiter extruders is…
This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…
with integrated supports
This is a great PG7 mount that worked well with my BTT SB2209 RP2040 board since it it out of the way from the connector, however I'm also using the BTT CANBUS cable (the one with the pre-molded XT60+2 connector on it) and there was no…
After adding the EBB RP2040 and Galileo mods… I was having issues with the canbus cable failing due to internal conductors breaking where the cable transitions to the plug, after many hours of printing. Tried other cable relief solutions…
The project has been adjusted to the EBB SB2209 USB board. Please use an empty PH connector (you should have spares anyway, delivered with a board) to isolate the piano wire from the port. Piano wire available on amazon My 3d design…
This is a version of hartk PG7 Umbilical for use with CNlinko LP-12 connector and a mounting location for 3DO Nozzle Camera Board.
I just wanted a way to get low-latency audio on my GameSir G8+ and couldn’t find anything online, so I created this myself. It holds my Galaxy Tab S9 without any issues, and I designed it so it should work with different tablets and…
My Kids have a small greenhouse made for Galileo Nature (ProSieben) by Clementoni, which was in need for additional plant pots. So, I designed two different pots for additional places in the greenhouse. In German: Das von Galileo Nature…
This PCB Mount can be used with both the Galileo 2 Standalone (G2SA) Orbiter mount version and the Sherpa-MINI mount version. Required parts for mounting PCB: 2x M3x5x4mm heat-set Inserts 2x M3x6mm Print Settings: Material: ASA Layer…
I couldn't find a compatible one, and the normal G2 dual sensor one was unreliable, D2HW are just better in every account. This is a bond of 2 designs, certainly not my hard work: https://github.com/Ntrondle/Galileo2_D2HW for the sensor…
Edit: I put the ears in the incorrect direction. This has been fixed. A quick and dirty remix of the Galileo 2 Extruder for the Voron Stealthburner, available at available at https://github.com/JaredC01/Galileo2. I basically just took…
Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.
G2E cat hears usable whith filametrix Twin sensor 5.5 ball
This is an attachment for mounting a smartphone vertically on the GameSir G8 Galileo Controller. By using a mapping app such as Mantis Gamepad, you can control smartphone games that do not support controllers. (Can't the GameSir app map…
I added the mounting holes for the G2SA so the Toolhead PCB mount can be secured to the extruder as well as the X carriage. I had been previously using an Orbiter 2 toolhead mount and the holes do not line up correctly on the X carriage.…
I like the exsisting hex patterns, but they didnt really fit the theme of the printer. The ‘cutouts’ have been made by just offsetting the base shape and cutting out the offset. This means it follows the same lines as the original and has…
Voron Galileo mount to use for any version of the board made by hartk. Added a new version 3 this one sits higher for a better fit on the Voron v1 printers. V2 is still the one to use for voron v2 printers. Print Settings Printer Brand:…
It didn't help with the high temperature of the toolhead mcu temperature but it's lighter.
I builded Trad Rack and than I needed a Toolhead sensor for galileo 2 extruder. In additional, I want to use trad rack parts(4mm ball, switch, 12mm self tapping screw)for this mod. it is working good and sensitive. No Support and printing…
The Galileo version of the Nitehawk cable door, so you can mount the chamber thermistor above the toolhead. Credits to JaredC01 (Galileo) and MotorDynamicsLab
G2 Galileo 2 SB2209 USB tool board fan 30mm with heat set inserts.
Spacer that prevents the USB-C from entering too deep into the phone, thus preventing connection between devices.
this is a 3d printed version of a long lost galileo's compass which in its hay day was used to draw ellipses. This should be a fun toy for all those learning constructive geometry Instructions print in abs at .25mm layer height with 50%…
Low profile design for 80mm tophat Use 2 heatsets and 20mm standoff
You need: 2 M3x5x4 Voron Thread Inserts 2 M3 Screws 2 of those clamps https://www.printables.com/model/767060-voron-24-umbilical-exhaust-grill-for-pug 1 Umbilical of course :-) either the original one…
Galileo 2 Extruder cover with the addition of 3010 fan with enough clearance for the EBB SB2209 CAN (RP2040). It will mount with the original hardware from the G2E and the fan should be a friction fit. with a 24v 3010 fan running at 100%…
Remix of Meowburner for the Galileo 2 with an ECAS collar
This is a Voron StealthBurner mod to allow the printer head boards like SB2209 and others to work more cooler. This is done to a 350mm Voron 2.4 but can fit other print sizes using SteathBurner. Print with supports like on the picture.
While diving I nearly lost my Galileo Sol computer when the wrist band suddenly broke. It was a few years old, and for a computer so pricey it definitely should not break so young. They will soon stop making them so they will be hard to…
Descripción General Este mod es la solución que ayuda con el estrangulamiento térmico ( thermal throttling ) cuando juegas títulos pesados o usas emuladores con el GameSir G8 Galileo. El diseño original del control bloquea la parte…
This is a simple umbilical mount for the Voron Stealthburner with the Galileo 2 extruder, intended for the Prusawire (which requires a compact umbilical mount). Compared to the original, 2 ziptie holes are used instead of just 1 to…
This is my first ever model and I don't know what I'm doing. Remix of JaredC01's Galileo2 Extruder cable cover with the thermistor mount from LDO's CW2 cable cover. Print with Voron settings. Material ABS/ASA Layer Height 0.2mm Extrusion…
"And yet it moves." Bring the spirit of Galileo Galilei — the father of modern science and free thought — back to life through 3D printing. This model was designed to merge the curiosity of the Renaissance with the precision of modern…
I like it sturdy. I wanted to have the cable connection on the lateral side and a little bit lower, so I designed my own strain relief. You will need a few melting inserts and M3 screws. Enjoy.
I had to modify the mount of alliprice for the Galileo extruder - the pancake motor was too THICC. So I had to adjust the parts and make them THICC too. In the comparison you see the white one resembles the old, shorter design. Jokes…
G2E For Filametrix, without any sensors.
for this little guy self explanatory due to positionion supports are suggested unfortunately comments or suggestions on a prettier version are welcomed!
![Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]](https://media.printables.com/media/prints/643093/images/5077730_2e554cb6-2575-420e-bb02-eb9297ec54fb_2b773503-77b1-47cf-bd2d-d7ff2e546f65/pxl_20231110_184825771.jpg)
