1 / 10
V-Minion Drag-Chain Assembly V2 (Z+X)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second version of the V-Minion Z and X axis drag-chain assembly
- Ocena
- 4,5 / 5
- Polubienia
- 74
- Pobrania
- 384
- Wydruki
- 2
- Wyświetlenia
- 2471
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 2) (Komentarze: 11)Remiksy (1)Kolekcje (119)Powiązane
Version 2 (1.0) of the Z and X Axis drag-chain assembly, there is an option of using either 10x15 or 10x20 width chains on the Z Axis.
*ADDED: EVA3_X_CHAIN_MOUNT_1.0 (Used to connect the X-Axis chain to EVA 3.0 Toolhead assembly).
*UPDATED: X Axis Pulley access through top of X_MOTOR_CAGE.

These chains are the same three hole type used on the Voron line of printers.

