Liczymy pasujące modele…
2020 T-Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Suitable for: Other sizes: Resize to adjust dimensions All our designs are free to download and use—because sharing…
Compatible with the following cable chain as it can be seen in the pictures: https://www.amazon.de/-/en/TXErfolg-Quality-Carrier-Printer-Adjustable/dp/B087R9LCH3 Specifications: Inner hole size: 10 x 20 mm (0.39 inches x 0.79 inches…
This is a mount to add to the standard 3 hole cable chain mount for the Stealth Burner. You bolt it on to the Stealth Burner cable mount and you can have a single 10x20 chain. Voron Stealthburner - VORON StealthBurner (vorondesign.com)…
These are the files used to update the ZeroG/Mercury 1 to use 2 MGN9H rails and the Voron Afterburner. You will need to use the 2.8mm shim plate to keep the belt alignment perfect otherwise it will dip in. The chain mount is for a 10x20…
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
This model was made as a remix of https://www.thingiverse.com/thing:5352264 I just stretched it and added a arch so that it would not bend. The pegs fit very looselly but once installed they good.
Created by Chanh Phuong Category: 3D Printing
Since I swapped out the springs for using 10x20mm rigid aluminum spacers instead and insulated the beplate as well, I needed a harness for the bed wiring that would fit. Printed from PETG (with a 0.6mm nozzle), no supports needed.
UPDATE 02.27 - file motor mount.stl switched to a bondtech extruder and the old file didn't fit anymore so i made a 4mm plate to fit between the stepper motor and the extruder, stiffened up the chain mount too This is a remix of the most…
Clip 2040 for cable chain 10x20
I used vasemod 0.9mm for perimeter. 0,2 mm distance between supports and object (bagbox-lid.stl)
Introduction This is a mold that allows you to make up to eight silicone feet at a time. The feet attach with M3 machine screws, preferably 8mm in length and with a countersunk head. I usually have a little bit of extra silicone left over…
I like to use a drag chain mount on my setup and i just switched to this direct drive mount so i fired up tinkercad and i designed the ugliest but easiest way to mount it, just slide it in... i use couple zip ties to secure the cables…
a simple filleted wheel for any project that requires a beefy wheel. designed to mount on an 8 mm shaft with a m3 nut and bolt takes about 4.5 hours to print one in pla+ at 150mm/s and 3000mm/s^2 quite strong (10-20 kg max)
This connects an Ender 6 gantry to a 10x20 Cable Chain. It provides an allowance for the MicroSwiss NG's extruder which is in the direct path of most chain terminators. The gantry requires two m3's, plus three additional m3's with nuts…
The cabling on the x gantry of my SV03 kept sagging no matter what I tried. The netting or whatever it's called started getting pulled apart from rubbing on prints and ended up destroying a long print. Mocked this up quick to add 10x20…
Schlauchanschluss 10x20 zum einkleben.
For Cable Ducts 10 x 20 mm with or without self-adhesive tape. Use some contact glue to attach the Angle Joints to the Cable Ducts.
Compatible with the following cable chain as it can be seen in the pictures: https://www.amazon.de/-/en/TXErfolg-Quality-Carrier-Printer-Adjustable/dp/B087R9LCH3 Specifications: Inner hole size: 10 x 20 mm (0.39 inches x 0.79 inches…
For Cable Ducts 10 x 20 mm with or without self-adhesive tape. Use some contact glue to attach the Angle Joints to the Cable Ducts.
For my Anet A8 I have bought a 210x200mm glass. I have fixed it with tongs but they hinder the extruder. So this heated corners block the glass without anything else and also fix the springs under the heated. Heatbed_corner_FR-BL: Front…
Quick and dirty mounting solutions for an off-the-shelf 10x20mm drag chain (like this one ). Suitable to slap onto damn near any model with a boolean operation. Inner Pin gives you full clearance to the wires within the cable chain at the…
A simple drag chain mount for Anycubic Mega X. It is for 10x20 Drag chain Distance between the holes for inserting the M3 nuts is 10mm, 10mm and 12.5mm from centre to centre on the drag chain end. Print Settings Printer Brand: Anycubic…
Thick Elegant Shelf Bracket with Arc Pattern I designed the bracket to use with shelf made with 2 scrap pieces of wood. Turned out a great project for my hallway! Dimensions: Arms: 210 x 200 mm Width: 25mm Note: Use Fusion360 file for…
