Voron Bootstrapper's Fan Kludge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you are building a Voron, you may want to just buy the functional parts, and then print the rest yourself. Instead…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
If you are building a Voron, you may want to just buy the functional parts, and then print the rest yourself. Instead of using a house fan (yes, you know you were thinking about it!) to cool you electronics compartment while you print the rest of your parts, why not just use something fast and easy (and maybe not ABS) to mount your fans to the 20x20 extrusions in the mean time? These mount with zipties and either M3 T-nuts or Hammerhead nuts with an M3x8 SHCS. How you wire up the fans is up to you, but you can wire one additional fan up to where the exhaust fan is supposed to connect for extra blowage.
Enjoy!
Print Settings
Rafts:
No
Supports:
No
Resolution:
any
Infill:
20%+
Filament: your favorite anything but TPU, or I guess ABS since you haven't printed your panel mounts yet. also your favorite
Notes:
4 walls, floors, and ceilings with at least 20% infill should make these strong enough to hold up to the weight of a many more plastic fans than you will be mounting on each one.
Category: 3D Printer Parts