Biqu H2 Visi Duct V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4020 duct for the Biqu H2
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a duct for the fantastic Biqu H2 extruder. I've made and tried others but I wanted one that blows air from both sides but that I can still see the print from the front to some degree.
I've included holes for heatset inserts for an induction probe and have included an adapter that should fit a BL Touch and should adjust up and down as needed. If the BL Touch mount needs adjusting please let me know as I do not have one to test with.
The duct It cools extremely well and I've included a picture of the overhang test.
The fan stays in very well with just one screw without even using a nut but it can be secured with 3 bolts if necessary.
update - Having used it for a month or so, and having to remove it for maintenance, I found the fan will rotate counter clockwise and then can be removed using only the one upper left bolt. To reinstall, just put the bolt in the upper left fan hole, and then put it into the upper left fan mount hole and rotate the whole fan clockwise and the fan snaps into place!