Clothes Hanger Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This coat hanger spacer will create an even spacing between all your coat hangers and create a very oganized look.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1564
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The print can be put on a clothes rail. The design is made for 25mm diameter rails but could be scaled up or remixed to fit any other rail diameter. It simply clamps on to it. No glue or sticky tape is needed.
You can download 2 different stl files:
hanger-spacer-v3-single.stl
This is a single spacer on which you can put a single coat hanger. You can simply attach them together while slicing to create the optimal length for your print bed.
hanger-spacer-v3-extended-27cm.stl
This is just an extended version of the single spacer on which you can put 9 coat hangers. It is designed to fit the print dimensions of my ender 3 s1 pro (printed vertically - 27cm height)
Ortographic projection
