X-axis Adjustable Endstop Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable endstop cover for ender3, ender 3 pro, ender 3 S1 and cr-10(possibly more)
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 231
- Wydruki
- 9
- Wyświetlenia
- 1826
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
X-axis cover with adjustable endstop. I uploaded a few different versions of this cover, one with cable management to route the toolhead wires in front of the left z extrusion( great for direct drive), second with a cable clip to rout the S1 ribbon cable in front of the z extrusion, third a cover with no cable management for bowden setups. The endstop can be moved left and right by several mm. Two m3x6 screws to fasten endstop to the mount and two m3x8-10 to fasten mount to cover. Cover uses the same stock m3 screws to attach to gantry.