1 / 3
Touchscreen case 7 inch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Touchscreen case with magnet rpi4 mount
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
Touchscreen case
I designed an touchscreen case for my octoprint touchscreen. I designed the case with the intention to mount it with m4 screws. I also designed an magnet mount, haven't tested it. The cables needed for the raspberry and touchscreen can easily be routed trough the holes.
I managed to print the top in 1 piece on my prusa. You need to rotate the top 21 degrees. Make sure to print without the skirt!
Print files
- Base, touchscreen fits in here
- Top, slides on top of the base. No screws neccasary
- Side R, (work in progress)
- Side R magnet mount, for mounting it to the ikea lack
- Side R Screw mount, for mounting with screws
- Side L, (work in progress)
- Side L magnet mount, for mounting it to the ikea lack
- Side L Screw mount, for mounting with screws
Print settings
- Printed on my prusa mk3s+
- Printed with .2mm layer height
- Printed with PETG
- Printed with .4 nozzle
- Printed on textured sheet for the best look
- Base printed with supports
Added option for m4 screw mount
The magnet mounts are not tested