Supplement for Testovent 415 flow meter (2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another supplement to adapt the TESTOVENT 415 flow meter to a rectangular outlet of up to 405 x 200 mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
I don't know if anyone can find this supplement for a Testovent 415 air flow meter (TESTO) useful. It went pretty well for me. If that's the case, I'll leave it here.
2 pieces of each type must be printed and joined with screws. Alternatively they can be joined with adhesive.
In this case, I used PLA to have no thermal requirements. PETG is a perfect alternative.
To improve the tightness of the supplement, it is advisable to add a self-adhesive rubber joint (EVA, neoprene or similar)
Additional material for assembly:
16 screws M3x10 DIN933 (ISO4017)
16 nuts M3 DIN934 (ISO4032)
32 washers M3 DIN125 (ISO7089)