Ender 3 (v2) Stealthburner (final) mounting plate + Probe and CAN board mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i threw together some files to create this stealthburner backplate to be used on an ender 3 (v2)
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 279
- Wydruki
- 0
- Wyświetlenia
- 4891
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I was on the search for a backplate for the ender 3 V2 for the final release of the stealthburner. since i couldnt find anything, that satisfied me, i found some other .step and made this backplate. it fits E3 (not tested) and E3V2 (tested) x-plate very well.
furthermore i wanted to use an EBB36 with my stealthburner but i cant screw it on the back of the cw2 motor, because that would restrict the movement because of the z profiles. so i also made a mount for that and a bl touch. You can also find a file for a bl touch only and Bltouch+ebb42.
Printsettings should be the same as all the other voron parts material can be PLA but i would recommend ABS/PETG
BOM for backplate (for V2):
4x M3x8 BHCS1x M3x18 BHCS + washer and nut(goes into the only hole that has no thread on the x-carrier plate)1x M3 short heat insert(goes into the right side)1x desired backplate
BOM for EBB/Bltouch mount:
2x M3x6 BHCS2x M3x8 BHCS1x M3x18 BHCS2x M3 short heat insert(goes into the bl touch mount from the bottom side)2x/3x printed spacers1x Mount (for either: BLT; BLT+EBB36; BLT+EBB42)
Probe_Offset:
X=38,4Y=2Z=1.43mm(please measure z for yourself)
The only problem i found is that the hotendcarriage is slightly in the way of one of the screws. you can see in one of the pictures, where you need to cut away a small bit of material to make it fit. it wont be bad for the function of the part. in the future i will release a recessed screwhole, but for now this works.
The last 3 pictures show our work in progress CANBurner Board.
thanks to:
- https://www.thingiverse.com/thing:4614384 for the backplate design, which i could adapt my design too.
- https://www.printables.com/de/model/292186-stealthburner-clockwork-2-filament-sensor for the exceptionally great extruder design that i used in the pics
- -the voron team for making the stealthburner
I would really like to receive any kind of feedback on my design, because that would help me design a file, that is just plug and play.